Digital microscopes can produce upright three-dimensional images when observing objects. It has strong stereo perception, clear and wide imaging, and long working distance. It is a conventional microscope with a very wide range of applications.

Digital microscopes are widely used in: industrial inspection, computer component inspection, telecommunications module inspection, scientific teaching tools, children's exploration microscopic experience, laboratory research, medical analysis, school research tools, insect anatomy, plant anatomy, skin inspection, hair quality Inspection, textile inspection, jewelry inspection, collection/coin inspection, printing inspection, PCB board inspection, etc.

Below, I will share the use of digital microscope:

1. Before using the USB digital microscope, you should install the driver and the corresponding V1.0U image viewing software.

2. Connect the digital microscope to the computer, and then run the Vibao1.0U software, select "Device" and then select "USB Point 2.0 v130 camera" in the menu "Dynamic Video" to start imaging.

3. In the menu "Options" "Video capture pin...", the output size can select the desired output video size;

4. In the menu "Options" "Video capture filter video proc Amp", you can adjust the brightness, contrast, and saturation of the image by yourself.

5. If the imaging light is relatively bright. You can put a piece of white paper first and adjust the focus. In the menu "Options" "Video capture filter Video Image", remove the check in front of White Balance Auto, and remove the check in front of Expose time AUTO and Dark Area. This imaging mode is manual horizontal mode, and the imaging system will automatically adjust the light. Then put the object to be inspected on the scanning electron microscope on the stage.